Home  About Us  Contact Us     
Balarshah Plant
 

The technology of Particle Board manufacture permits full utilization of forest resources as well as recycling of wastes from wood or other lignocellulosic materials and therefore helps conserve the natural resources and maintain ecological balance. As a board material, it is a substitute to timber, plywood and block board in various applications in the building and furniture industries.

 
  Particle Board:

The plant has a manufacturing capacity of 6335 tonnes per annum of Particle Boards and a veneer slicing unit of capacity 2500 cubic meters per annum. The plant has recently been modernised and equipped by us with the state-of-the-art modern machines and equipment for manufacturing of flat pressed three layered/graded Particle Board. It manufactuers..

 
  • Exterior Grade phenol bonded teakwood Padrticle Board stamped with IS: 3087-1985, Grade - I
  •  
  • Interior grade urea bonded Particle Board stamped with IS:3087-1985,Grade - II
  •  
  • Teak/Commercial Veneered Particle Board in both Interior and Exterior grades conforming to IS: 3097-1980.
  •  
  • Prelaminated Particle Board in Interior grades stamped with IS: 12823-1990.
  •  
  • Prelaminated Particle Board in Exterior grades stamped to IS:12823-1990.
  •  

    All the above grades are availbale in a range of thickness ranging grom 9mm, 12mm, 18mm, 21.5mm, 25mm to 35mm making them suitable for a large number of applications such as False ceiling, False flooring, Cupboards, Table Tops, Pelmets, Door Panel inserts, Flush doors, Partitioning, Panelling etc,. We would especially like to mention here our 35mm thick Plain Particle Board which is an effective option wherever floor trunking is required to be done.

     
      CHARECTERISTICS OF PARTICLE BOARD :
    The Particle Board is an engineered Panel material in the sense that the bioard characteristics are predtermined and controlled by manipulations of parameters like particle geometry, resin system etc.
      The critical properties of Particle Board are the following :
      1. Density : Other things being equal an increase in density of a given board will increase the strength properties. The increase in density will also make a smoother and tighter edge.
      2. Internal Bond : This is a measure of bonding strength between the individual particles within the board, which indicates the force required to pull apart, a panel in a direction perpendicular to the surface.
      3. Modulus of rupture : This is a measure of the load necessary to break a panel in bending.
      4. Modulus of elasticity : This is a measure of resistance offered by the board to deflaction under a load. It is an indication of the stiffness of a panel.
      5. Screw holding strength : This represents the force required to pull out a standard specified screw under specified conditions of test. The face and edge test values are determined seperately.
     
    Our Manufacturing Plants:
    Sanathnagar Plant Nacharam Plant Jeedimetla Plant Balarshah Plant